The Yampad project is an open-source, QMK powered, hot-swappable, RGB-backlighted, OLED featured, and rotary encoder supported mechanical numpad. It is powered by a pro-micro (or compatible) controller.
This new revised version of the Yampad supports a rotary encoder under the OLED screen and a 2U postion for the "0"key. The case has been updated to support the changes.
Instructions for this kit can be found at the github repo here.
This is sold as a kit and assembly will be required. The following components are included:
- 18 x Diodes SOD-123
- 9 x WS2812B RGB Diodes
- Acrylic top and bottom plates
- 8 x Brass stand-offs
- 16 x 6mm T5 Torx screws
- 18 x Kailh hot-swap sockets
- 0.91" OLED Module
- 6x6x4.3 Pushbutton Switch
- EC-11 Rotary Encoder
The capacitors in the build guide are not included, nor are they required for the function of the LEDs.
Required to complete
Highly recommended you socket your pro/sea-micro with the following components
- This can be a difficult build due to the surface mount LEDs.