This is a complete kit for the Lily 58 Pro Keyboard. All components that are required to build the keyboard are provided, except pro-micros, keyswitches and keycaps.
The Lily58 is a 58 key split keyboard design by kata0510, featuring a 6x4 column stagger and 4 thumb cluster keys on each hand.
This keyboard will operates QMK firmware and is configurable with Via. Please find the via firmware at the github project page.
Contents
- 2 x Acrylic Top Plate
- 2 x PCB
- 2 x Acrylic Bottom Plate
- 1 x TRS Cable
- 2 x TRRS Sockets
- 2 x 2 x 6 Pushbutton Switches
- 2 x .91" OLED Displays
- 58 x Kailh Hotswap Sockets
- 60 x SOD-123 Diodes
- 10 x 7mm Brass Standoffs
- 10 x 4mm Torx Screws
- 10 x 6mm Torx Screws
- 8 x Rubber Feet
Required Components
Tools required to complete this kit
- Soldering Iron and Solder
- T5 Torx Driver
- Tweezers (Non-magnetic)
Preassembled Kits
Kits assembled by customKBD will include 2x sea-micros and are seated on a combination of F-M machined pin headers and mill-max pins. You will still need to provide your own switches and keycaps.
