This is a complete kit for the Lily 58 Lite (Rev 2) Keyboard. All components that are required to build the keyboard are provided, except pro-micros, keyswitches and keycaps.
The Lily 58 requires switches to soldered directly to the PCB and is compatible with both MX and Choc switches. If you do not require hot-swap sockets - this is the one to get for a quick build.
This keyboard will operates QMK firmware and is configurable with Via. Please find the via firmware at the github project page.
Contents
- 2 x FR4 Top Plates
- 2 x PCB
- 2 x Acrylic Bottom Plate
- 1 x TRS Cable
- 2 x TRRS Sockets
- 2 x 2 x 6 Pushbutton Switches
- 2 x .91" OLED Displays
- 2 x OLED Covers
- 60 x SOD-123 Diodes
- 10 x 7 mm Standoffs
- 4 x 14 mm Standoffs
- 28 x 5 mm Torx Screws
- 10 x 6mm Torx Screws
- 8 x Rubber Feet
Required Components
- 2 x Sea Micro or a compatible micro-controller.
Tools required to complete this kit
- Soldering Iron and Solder
- T5 Torx Driver
Credits
The Lily 58 Lite is a 58 key split keyboard design by kata0510.
